Reverse Installation
 |
 Print this page Mail this pageMore information |
Reverse installation of the surface so that the projection side is located to the rear.
Specify this method when the projection screen surface needs to exit the case reversely because the normal screen path is obstructed by an obstacle or because the case is to be mounted to a beam. Note that there are two reverse installation options. The projection screen fabric can either be configured to exit the case at the front or the mounting brackets can be mounted in reverse. Indicate clearly what your requirement is so that Projecta can produce the screen required.
Available for:
- Tensioned Descender (RF) Electrol
- Descender (RF) Electrol
- Tensioned Elpro (RF) Electrol
- Elpro (RF) Electrol / Cinelpro (RF) Electrol
- Compact (RF) Electrol / Cinema (RF) Electrol
- Tensioned Elpro Large Electrol
- Elpro Large Electrol
- ProScreen CSR / ProCinema CSR
- ProScreen / ProCinema
- Hapro Manual
- Compact Manual
The Projecta Screen Designer assists designing the projection screen that exactly meets the needs of the installation. Use this application to generate a PDF file with the specifications of the customised screen. E-mail or fax the drawing to Projecta to request a quotation. www.projectascreens.com/screendesigner
